Button

X5 e53 spare key doesn't work

X5 e53 spare key doesn't work
  • 3501
  • Felix Grant
  1. How do I program my BMW e53 key?
  2. Why would both key fobs stop working?
  3. How do I resync my BMW key fob?
  4. How much does it cost to reprogram a BMW key?
  5. How do you program a key fob for a 2001 BMW X5?
  6. How do I reset my BMW after changing the battery?
  7. How do I program my 2008 BMW x5 key fob?
  8. How do you reset BMW key?
  9. How do I reprogram my key fob after replacing my battery?
  10. Do you have to reprogram a key fob after changing the battery?
  11. Why is my remote start not working?

How do I program my BMW e53 key?

How to Program a Key to a BMW X5

  1. Enter the BMW X5. Shut the door. Put the key in the ignition and turn it to the "ACC" position on the lock cylinder.
  2. Move the ignition key to the "OFF" position. Take the key out of the ignition. Press down on the key's "Unlock" button. Release the "Lock" button. Do this three separate times within five seconds.

Why would both key fobs stop working?

The most common problem with these car key fobs is that the batteries just go dead over time, in which case replacing the battery should fix the problem. Other key fob remote problems are more complicated, but it's still possible to fix them. ... Check and replace the key fob battery as needed.

How do I resync my BMW key fob?

Hold the unlock button down, then press the BMW logo three times in rapid succession. Then, remove your finger from the unlock button. If you have additional BMW keys that you need to program, repeat step four with each additional fob, within thirty seconds of syncing the original.

How much does it cost to reprogram a BMW key?

These types of keys have to be programmed in order to start the car and therefore the car will have to be towed to the dealership which will result in an additional cost. The estimated cost for a transponder key: Usually around $300 for a new key. An estimated cost for a remote key: Usually around $1000 for a new key.

How do you program a key fob for a 2001 BMW X5?

2001 BMW X5 Key Fob Remote Programming Instructions

  1. turn key to position 1 five times very quickly.
  2. remove key.
  3. Hold unlock button then press lock button 3 times, release unlock button.
  4. If you have another key do the same button pressing within 30 seconds.

How do I reset my BMW after changing the battery?

How to Reset BMW Computer After Battery Change

  1. First of all, turn the ignition key of the BMW car to the accessory position once the lights and radio are on. You have to do this before starting the vehicle. ...
  2. Again, press the “Trip” button and hold until Reset appears.
  3. Then, press the same button for the third time. Now, the BMW computer will reset in no time.

How do I program my 2008 BMW x5 key fob?

Programming a New BMW Key Fob from Scratch

Remove the BMW key fob from the ignition. Holding down the unlock button, press the lock button (BMW logo) three times, then release the unlock button. If you have than one key fob to program, repeat step 3 within 30 seconds of the original key programming.

How do you reset BMW key?

How to Reset a BMW Key

  1. Unlock your BMW using the metal key.
  2. Place the key in the ignition.
  3. Turn the key to the "On" position.
  4. Turn the key to the "Off" position.
  5. Remove the key from the ignition.
  6. Press and hold the "Unlock" button on your key. Press the "Lock" button on the key three times. Your key is now reset and should function properly.

How do I reprogram my key fob after replacing my battery?

How do I reprogram my key fob?

  1. Put the key into the ignition and remove it twice in five seconds.
  2. Open and close the driver door twice in forty seconds.
  3. Put the key in the ignition and remove it.
  4. Open and close the driver door twice in forty seconds again.
  5. Put the key in the ignition and close the driver's door.

Do you have to reprogram a key fob after changing the battery?

Do I have to reprogram my fob after battery replacement? After replacing the battery in the key fob remote, you will need to reprogram the remote to the vehicle. This is why the alarm is being tripped for the computer is not recognizing the remote.

Why is my remote start not working?

Hood Pin Switches Or Sensors

The single biggest thing that can cause a remote starter not to engage is a faulty or missing hood switch. This device gets installed under the hood of your vehicle and prevents the engine from starting when the hood is up.

Location of 2019 Ford Fusion door code
This is usually located on the left panel toward the back of your vehicle. This panel should be removable with a screwdriver. Once you have your hands...
Do I need a sealant for a metal gasket on a water pump
When changing a water pump, replace all old gaskets and seals with new ones. If your new pump comes with a seal, make sure it's in impeccable conditio...
Coolant flows straighr from rad to muffler?
Why is antifreeze coming out of my muffler?What happens when coolant gets into the exhaust?Can coolant leak from exhaust manifold?Why is the coolant i...

Yet No Comments