Camshaft

What does error code POO13 mean?

What does error code POO13 mean?
  • 1135
  • Mark Baldwin

P0013 is the OBD-II generic code indicating that the engine control module (ECM) has determined that the bank 1 exhaust camshaft OCV has an open or short circuit.

  1. How serious is P0013 code?
  2. Can I drive my car with a P0013 code?
  3. What is an exhaust camshaft position actuator circuit?
  4. Where is the camshaft position actuator solenoid?
  5. Can low oil cause P0013?
  6. How much does it cost to fix a camshaft sensor?
  7. Where is the exhaust camshaft position sensor located?
  8. Is it safe to drive with P0014 code?
  9. How do you know if your camshaft actuator is bad?
  10. Can I drive my car with a bad camshaft position sensor?
  11. What does a cam sensor do when it goes out?

How serious is P0013 code?

How Serious Is P0013 Code? P0013 is moderately severe where it doesn't need immediate attention. However, if left unattended, the engine fuel consumption can get worse or result in carbon fouling in the valve components.

Can I drive my car with a P0013 code?

A code p0013 stands for the variable camshaft timing solenoid voltage being out of range. ... The circuit may also have a short somewhere that is causing the rise or shortage of voltage. In the mean time, until further testing can be done, the vehicle should not be an issue to drive.

What is an exhaust camshaft position actuator circuit?

The camshaft position actuator solenoid valve controls the oil flow to the actuator, which in turn, advances or retards the camshaft. Solenoid operation is controlled by the car's primary computer, also known as the powertrain control module or PCM.

Where is the camshaft position actuator solenoid?

Camshaft Position Actuator Solenoid are located on the cylinder head of your Chevrolet or GM vehicle control the position of the camshafts.

Can low oil cause P0013?

Sludge buildup can cause a P0013 trouble code

Sludge is caused by running the engine at low oil levels, neglecting oil changes or going too far on an oil change, poor PCV operation or using a poor quality oil. Change the oil, clear the code and drive the vehicle.

How much does it cost to fix a camshaft sensor?

To have the sensor replaced, you can expect to pay between $130 and $200. For labor, you should pay between $70 and $90, and parts can cost as much as $100 or slightly more, but you could pay as little as $60 for them, depending on the kind of car you have.

Where is the exhaust camshaft position sensor located?

The camshaft position sensor is always located near the camshaft, often at the top of the valve cover, but it can also be installed from the side of the cylinder head. Check around the head or valve cover and follow any electrical wires and you will for sure find the camshaft position sensor.

Is it safe to drive with P0014 code?

The most common problems consist of increased engine stalling, rough engine idle, lowered fuel economy, and rattling/knocking noises from the engine. Continuing to drive the vehicle in this condition can cause severe damage to multiple internal engine components.

How do you know if your camshaft actuator is bad?

Symptoms of a bad or failing camshaft position sensor

  1. Vehicle does not drive like it used to. If your vehicle idles roughly, stalls frequently, has a drop in engine power, stumbles frequently, has reduced gas mileage, or accelerates slowly, these are all signs your camshaft position sensor could be failing. ...
  2. Check Engine Light comes on. ...
  3. Vehicle will not start.

Can I drive my car with a bad camshaft position sensor?

Your car won't fail right away if there's a problem with your camshaft ignition sensor by any means. You can still drive without one, but the overall performance of your vehicle will degrade over time.

What does a cam sensor do when it goes out?

If you ignore the symptoms listed here and your camshaft position sensor fails, your vehicle will not start. As a camshaft position sensor weakens, so does the data it transmits to the ECM. Eventually the data signal becomes so weak the ECM switches off fuel and spark delivery, and your engine will not start.

Can performance brakes (Brembo's) be used on road trips in the rain?
Can disc brakes get wet?Why do my brakes work better in the rain?Are wet brakes bad?What is so special about Brembo brakes?Is it normal for brakes to ...
Ford Radio Code
First of all, you need to find the serial number of the Ford radio to get the stereo key code. The serial number can be obtained in these simple ways:...
Have I damaged my car by attempting to reverse with hand/park brake up? [duplicate]
Is it bad to reverse with handbrake on?Does driving with the parking brake on damage the car?What happens if you reverse with emergency brake on?What ...

Yet No Comments