Battery

Car battery charger not working on one battery, but works on another

Car battery charger not working on one battery, but works on another
  • 748
  • Edward King
  1. Why won't my battery charger charge my car battery?
  2. Why would a battery charger stop working?
  3. How do I know if my battery charger is bad?
  4. What happens if you charge a battery with too much voltage?
  5. Can a completely dead battery be recharged?
  6. How do you trick a battery to charge it?
  7. Why is my Schumacher battery charger not working?
  8. How do you revive a car battery that won't charge?
  9. Will a trickle charger charge a dead battery?
  10. How do you check if a battery is working?
  11. How do I know if my car battery charger is working?
  12. What should a 12 volt battery read when fully charged?

Why won't my battery charger charge my car battery?

However, if you find that your charger refuses to charge your car battery you can easily repair the fuse in the mains plug and the fuse on the battery charger, as it's highly likely to be one of the fuses that have blown.

Why would a battery charger stop working?

We went over three major reasons for the battery not charging and their solutions, the first being the poor input source or the charger being in protection mode, the battery temperature being outside of normal charging range, and the safety timer expirations. That's the end of my presentation.

How do I know if my battery charger is bad?

Check the battery charger to see how much power it's giving off, if you continue to receive a negative reading from the batteries. A negative reading will indicate a bad battery charger, and you should replace it.

What happens if you charge a battery with too much voltage?

Reaching the voltage limit, the battery saturates; the current drops until the battery can no longer accept further charge and the fast charge terminates.

Can a completely dead battery be recharged?

It is possible to recharge a dead battery, and depending upon the situation you are in, a dead battery is generally an easy fix, whether you are stuck in your garage and can handle it yourself or you are in the middle of nowhere and need professional, quick, and efficient service in the blink of an eye.

How do you trick a battery to charge it?

If you take a pair of jumper cables and connect a good battery to the bad battery in parallel (+ to +, - to -) and then connect the charger to the good battery, it will trick the charger into seeing a good voltage, and charge both batteries.

Why is my Schumacher battery charger not working?

If your Schumacher battery charger will not turn on while it is properly connected, you may need to replace you main power regulator board. Double check to make sure your connection is secure and that your battery is working properly before replacing a part.

How do you revive a car battery that won't charge?

The following are seven unconventional ways to revive a dead car battery:

  1. Use Epsom Salt Solution. ...
  2. The Hard Hand Cranking Method. ...
  3. The Chainsaw Method. ...
  4. Use Aspirin Solution. ...
  5. The 18-Volt Drill Battery Method. ...
  6. Use Distilled Water. ...
  7. The Hot Ash Method.

Will a trickle charger charge a dead battery?

A trickle charger is a car battery charger designed to be left on a car for a long period of time to re-charge the battery. It slowly adds the charge to the battery and does not allow for the normal depletion of charge that batteries commonly have.

How do you check if a battery is working?

Use a multimeter or voltmeter to check your battery.

Watch the readout on the multimeter. You should be looking at volts on your reader. If your battery is reading at or above 12.45 volts, your battery is still in good shape, and any problems you may be having are likely caused by something else.

How do I know if my car battery charger is working?

Troubleshooting 12 Volt Auto Battery Chargers

  1. Set the dial on the voltmeter to "Ohms" and test the voltmeter. ...
  2. Touch the lead wires on the voltmeter to the lead wires on the 12-volt auto battery charger. ...
  3. Check the resistance. ...
  4. Set the dial to the highest volt setting on the voltmeter.
  5. Turn the battery charger on.

What should a 12 volt battery read when fully charged?

A fully charged battery will typically display a voltmeter reading of about 12.6 to 12.8 volts. If your voltmeter is showing a voltage anywhere between 12.4 and 12.8, that means your battery is in good shape. Any voltage above 12.9 volts is a good indicator that your battery has excessive voltage.

I have problems with low beam and cruise control on my Holden Commodore VY
How do you turn off traction control on a Holden Commodore?What is the difference between a VY and VZ Commodore?How many VY Calais were made?What does...
Do I have to disconnect the battery before I replace AC pressure sensor/pressure switch?
How do you replace a low AC pressure switch?What are the symptoms of a bad AC pressure switch?How much does it cost to replace an AC pressure switch?H...
Starter solenoid clicks solidly. Starter won't spin
Why does my starter engage but not spin?Will a bad starter solenoid still click?What causes a starter solenoid to click?What might cause a starter mot...

Yet No Comments